Ricoh Aficio MP C3500 EFI General Settings Manual page 71

❖ Effective Protocol
Select the protocol to use in the network.
• IPv4: Active / Inactive
• IPv6: Active / Inactive
• NetWare: Active / Inactive
• SMB: Active / Inactive
• AppleTalk: Active / Inactive
❖ NCP Delivery Protocol
Select the protocol for NCP delivery.
• IPX Priority
• TCP / IP Priority
• IPX Only
• TCP / IP Only
If you select "IPX Only" or "TCP / IP Only", you cannot switch the protocol
even if you cannot connect with it. If "NetWare" in [Effective Protocol] is set to
"Inactive", you can only use TCP/IP.
❖ NW Frame Type
Select the frame type when you use NetWare.
• Auto Select
• Ethernet II
• Ethernet 802.2
• Ethernet 802.3
• Ethernet SNAP
❖ SMB Computer Name
Specify the SMB computer name.
Enter the computer name using up to 15 characters.
"*+,/:;<>=?[\]|. and spaces cannot be entered.
Do not set a computer name starting with RNP and rnp.
Use uppercase letters for alphabets.
❖ SMB Work Group
Specify the SMB work group.
Enter the computer name using up to 15 characters.
"*+,/:;<>=?[\]|. and spaces cannot be entered.
Use uppercase letters for alphabet.
Interface Settings
2
61