Settings Required To Use Scan To Folder Function - Ricoh Aficio MP C3500 EFI General Settings Manual

Note
❒ For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒ [LAN Type] is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
❒ When POP before SMTP is set to [On], you must also make settings for Recep-
tion Protocol and POP3 / IMAP4 Settings.
❒ When setting POP before SMTP to [On], check POP3 port number in E-mail
Communication Port.
Reference
p.59 "Interface Settings"
p.69 "File Transfer"

Settings Required to Use Scan to Folder Function

This section lists the settings required for sending files.
Ethernet
This section lists the settings required for sending files with an Ethernet connection.
For details about how to specify the settings, see "Interface Settings" and "File
Transfer".
Menu
Interface Settings/Network Machine IPv4 Address
Interface Settings/Network IPv4 Gateway Address
Interface Settings/Network DNS Configuration
Interface Settings/Network DDNS Configuration
Interface Settings/Network Domain Name
Interface Settings/Network WINS Configuration
Interface Settings/Network Effective Protocol
Interface Settings/Network Ethernet Speed
Interface Settings/Network LAN Type
Interface Settings/Network Permit SNMPv3 Communication
Interface Settings/Network Permit SSL/TLS Communication
Interface Settings/Network Host Name
File Transfer
File Transfer
User Tool
Scanner Resend Interval Time
Number of Scanner Resends
Network Settings
Setting Requirements
Necessary
Necessary
As required
As required
As required
As required
Necessary
As required
Necessary
As required
As required
As required
As required
As required
1
25