Table of Contents
Advertisement
Figure 7
shows the front panel of the Quad Serial WAN expansion module.
G2M-SECAC-04
Cabling and Connector Specifications
The following table lists the media specifications for the Dual Serial and Quad
Serial – C/CE expansion modules.
Table 13. Dual Serial and Quad Serial – C/CE WAN expansion module specifications
Port Type
Dual serial
1.
Connector cables for WAN expansion modules may be ordered from Enterasys Networks. For detailed
information, including part numbers, see Dual Serial and Quad Serial – C/CE Expansion Modules
LEDs
The Dual Serial and Quad Serial – C/CE expansion modules use the following LEDs.
Table 14. Dual Serial and Quad Serial – C/CE WAN expansion module LEDs
LED
Per-port Link
Per-port Rx
Per-port Tx
Enterasys X-Pedition 2000 Getting Started Guide
1
2
Link
Rx
Tx
Figure 7. Front panel of Quad Serial – C/CE WAN expansion module
•
V.35, X.21, EIA530, EIA530A, or RS449
•
LFH-60 high density connector; see Dual Serial and Quad Serial –
C/CE Expansion Modules
•
Recommended 3 meters (10 feet) segment length for standard WAN
expansion module-to-CSU/DSU data port.
Indicates that the expansion module detects a cable plugged into the port
and a good link is established.
Indicates when the port's transceiver receives data.
Indicates when the port's transceiver transmits data.
3
4
1,2
Link
Rx
Tx
Specification
on page 38
Description
Hardware Overview
Quad Serial - C
3,4
for pin assignments
1
on page 38
.
19
Advertisement
Table of Contents
