Enterasys X-Pedition 2000 Getting Started Manual page 74

Loading System Image Firmware
Here is an example:
xp-1# system image choose E9050-image
Making image E9050-image (version E9.0.5.0) the active image
for next reboot on Master CM . . .
%SYS-I-CHS_PRIMARY_OK, image successfully chosen on Primary CM
6. Enter the system image list command to verify the change.
xp-1# system image list
Images currently available on Master CM:
E9050-image (version E9.0.5.0) [selected for next boot]
Note:
58
You do not need to activate this change.
Enterasys X-Pedition 2000 Getting Started Guide