Setting Up Asynchronous Data (Rs-232); Setting Up High Speed Data Over Ethernet - Rx1290/Swo/Hsether - Ericsson RX1290 Reference Manual

Operating the Equipment Locally
Step
3
4
5
6
3.7.9

Setting Up Asynchronous Data (RS-232)

These menu pages allow status monitoring and configuration of the low speed data.
Table 3.18 Setting Up Async Data
Step
1
2
3.7.10 Setting Up High Speed Data Over Ethernet – RX1290/SWO/HSETHER
These menu pages allow status monitoring and configuration of the high speed data
over Ethernet software option.
Table 3.19 Setting Up High speed Data over Ethernet
Step
1
3-18
Action
Scroll to Menu 3.3.4 and edit the
Audio 1 digital output format
(AES3 or AC-3) and output
routing (STEREO, MIXED TO
BOTH, LEFT TO BOTH, or
RIGHT TO BOTH). Press Save.
Scroll to Menu 3.3.5 and edit the
clipping value (12 – 24 dB).
Press Save.
Scroll to Menu 3.3.6 and edit the
AC-3 down mix parameter
(SURROUND STEREO or
CONVENTIONAL STEREO)
Press Save.
Go to the Menu 3.4 for Audio 2,
Menu 3.5 for Audio 3, Menu 3.6
for Audio 4 and repeat steps 2
through 5.
Action
Go to Menu 3.7 and press
Edit. Select the data stream
PID.
Scroll to Menu 3.7.1 and edit
the low speed data output
(ENABLED or DISABLED).
Press Save.
Action
Go to Menu 3.8 and press
Edit. Select the data stream
PID.
Result
Edits the Audio 1 digital output format and
output routing.
Note that when the input signal is STEREO,
the Audio digital output format will always be
STEREO.
Edits the clipping value.
Edits the AC-3 down mix parameter.
Selects the audio component.
Result
Selects the data stream.
The unit receives and displays the correct bit-
rate.
Result
Selects the data user PID number.
EN/LZT 790 0003/2 R1A