Async Data Menu; Ethernet Data Menus - Ericsson RX1290 Reference Manual

Menus
Table C.18 Audio 4 Menu
Display Title: Audio 02
XX Streams
WWWW WWWW W
Sampling Rate XX.X kHz
Bit-rate YYY kbit/s
Rate Buffer Level
Delay Adjustment XXX.X ms
Digital Output XXXXX
Routing YYYYYY
AC3 Downmix Method
XXXXXXXXXXXXX
C.7.7

Async Data Menu

The Async Data submenu allows status monitoring and configuration of the low speed data.
Table C.19 Async Data Menu
Display Title: Async Data
WW Streams PID XXXX
YYYYYYYYYYY
Bit-rate
YYYYYYYY ZZZZ
C.7.8

Ethernet Data Menus

The Ethernet Data submenu allows status monitoring and configuration of the high
speed data over Ethernet option.
C-18
Description
PID YYYY XX is the number of Audio streams present
VVV ZZZZ YYYY is the currently selected audio4 PID
ZZZZ is the stream status (OK, STOP, FAIL)
VVV is the audio layer (MUS, LIN, DD)
WWWWWWW is the audio language
XX.X is the Audio 4 sample rate
YY is the Audio 4 bit-rate
Audio 4 percentage rate buffer level
XXX.X is the Audio 4 decoding delay (range +/- 0 to 49ms)
XXXXX is the editable Audio 4 digital output format (AES3,
AC-3)
YYYYYY is the editable Audio 4 output routing (STEREO,
MIXED TO BOTH, LEFT TO BOTH, RIGHT TO BOTH)
XXXXXXXXXXXXX is the editable Dolby Digital AC-3
downmix parameter (SURROUND STEREO,
CONVENTIONAL STEREO)
Description
WW is the number of Low speed data streams present
XXXX is the currently selected LSD PID
YYYYYYYYYYY is the stream status (PRESENT, NOT
PRESENT)
XXXXX is the Asynchronous data bit-rate (Up to 38400 bit/s)
YYYYYYYY is editable control (ENABLED, DISABLED)
ZZZZ is the output status (OK, STOP, FAIL)
EN/LZT 790 0003/2 R1A