Svga Output (Rgb Hv) - Ericsson RX1290 Reference Manual

Installing the Equipment
In addition, four unbalanced digital audio outputs are available
via separate BNC connectors.
Table 2.5 Analogue/Digital Audio Connectors
Item
Connector type
Connector
designations
Pin-outs
Nominal output
impedance
Maximum data rate
Analogue Output level
Load impedance
Table 2.6 Digital (Unbalanced) Audio Connectors
Item
Connector type
Connector designation
Pin-outs
2.7.5

SVGA Output (RGB HV)

The EQUIPMENT is equipped with a SVGA 15-pin D-type
connector for video output monitoring in the standard
configuration.
The SVGA connector shall be set to RGB/HV (SVGA) or
YPrPb under control of the user interface and remote
control interfaces.
2-12
Specification
9-way, D-type, Male
AUDIO 1
AUDIO 2
Pin 1 - Digital audio +
Pin 2 - Ground
Pin 3 - Left +
Pin 4 - Right +
Pin 5 - Ground
Pin 6 - Digital audio -
Pin 7 - Ground
Pin 8 - Left -
Pin 9 - Right -
50 Ω
3.072 Mbps
+18 dBm nominal clipping level.
Selectable in range 12 to +24 dBm.
≥600 Ω balanced
Specification
BNC 75 Ω socket
AUD 1, AUD 2, AUD 3 and AUD 4
Centre Digital Audio output (AES/EBU)
Shield Ground/Chassis
AUD 1
EN/LZT 790 0003/2 R1A