Restarting The Unit - Ericsson RX1290 Reference Manual

Operating the Equipment Locally
Step
6
7
8
9
10
11
Table 3.42 Viewing the Multi-Format Receiver Details Menu
Step
1
2
2
3
4
5
3.12

Restarting the Unit

The System Restart submenu allows the user to reboot the unit without having to
remove and insert the power cable.
Table 3.43 System Restart Menu
Step
1
2
3
3-28
Action
Scroll to Menu 7.1.3.1 and edit the
Subnet Mask. Press Save.
Scroll to Menu 7.1.3.2 and edit the
Gateway address. Press Save.
Scroll to Menu 7.1.4 and
activate/deactivate the Restore system
defaults. Press Save.
Scroll to Menu 7.1.5 and edit the
Service Hunt Mode (ENABLED or
DISABLED). Press Save.
Scroll to Menu 7.1.6 and edit the Input
Stream SI Type (AUTO, ATSC or
DVB). Press Save.
Scroll to Menu 7.1.7 and edit the
Customization Key. Press Save.
Action
Go to Menu 7.2.
Scroll to Menu 7.2.1.
Scroll to Menu 7.2.2.
Scroll to Menu 7.2.3.
Scroll to Menu 7.2.4.
Scroll to Menu 7.2.5.
Action
Go to Menu 7.3.
Press Edit.
Press Save to activate.
Result
Edits the Subnet Mask.
Edits the Gateway address.
Edits the Restore System Defaults menu.
Edits the Service Hunt Mode menu.
Edits the Input Stream SI Type.
Edits the Customization Key menu.
Result
Accesses the Multi-Format Receiver Details
Menu and displays the Electronic Serial Number.
Displays the Software Version.
Displays the Firmware Version.
Displays the Hardware Version.
Displays the PLD Version.
Displays the Temperature.
Result
Accesses the System Restart menu.
ACTIVATE will be displayed.
Unit is restarted.
EN/LZT 790 0003/2 R1A