Entering The Oac Lockout Pin; Returning The Unit To Local Control Mode - Ericsson RX1290 Reference Manual

However, if a situation occurs whereby the local user needs to regain control over
the unit, without a local lockout relinquish command being sent from the OAC
control PC, a four digit Personal Identification Number (PIN) may be entered through
the keypad.
Ericsson Customer Services Help Desk will not be able to provide you with the Local
lockout PIN, as it is uniquely created at the time of the lockout.
The user creates the PIN at lockout time. To obtain the PIN, please consult the
person responsible for the administration of the unit.
4.1.5.3

Entering the OAC Lockout PIN

Table 4.4 Entering the OAC Lockout PIN
Step
1.
2.
3.
4.2

Returning the Unit to Local Control Mode

Once the unit is in remote control mode, no local controls are available. To reacquire
local control, it is necessary to set the remote control parameter back to Front
Panel.
Table 4.5 Configuring the Unit for Local Control
Step
1.
2.
3.
EN/LZT 790 0003/2 R1A
Action
Go to menu #4.3.6 DIRECTOR.
Press Edit.
Enter the four-digit PIN and
press Save.
Action
Go to menu 7.1.
Press Edit.
Press the down pushbutton and
select 'FRONT PANEL' and
press Save.
Caution!
Result
Displays 'NCP LOCK OVERRIDE PIN'.
Displays 'ENTER CURRENT PIN'.
The unit is ready for local control.
Result
Displays 'OPERATING MODE'.
Displays 'SERIAL REMOTE' or 'DIRECTOR
NCP'.
The unit is ready to be locally controlled.
Operating the Equipment Remotely
4-5