Setting Up Teletext; Setting Up Vitc - Ericsson RX1290 Reference Manual

Step
2
3
3.7.11

Setting Up Teletext

Table 3.20 Setting Up Teletext
Step
1
2
3
3.7.12

Setting Up VITC

Table 3.21 Setting Up VITC
Step
1
2
EN/LZT 790 0003/2 R1A
Action
Scroll to Menu 3.8.1 and edit
the High speed data output
(ENABLED or DISABLED).
Press Save.
Scroll to Menu 3.8.3 and edit
the Forward to Gateway
ON/OFF and the Gateway IP
address menu. Press Save.
Action
Scroll to Menu 3.9. and edit
the parameter for stream or
PID value. Press Save.
Scroll to menu 3.9.1 and edit
the parameter for enabling
Teletext (ENABLED or
DISABLED)
Scroll to menu 3.9.2 and edit
the parameter (ENABLED or
DISABLED)
Action
Scroll to Menu 3.10.1 and edit
the parameter for enabling
VITC pass-through (ENABLED
or DISABLED). Press Save.
Scroll to menu 3.10.2 and edit
the line number for VITC to be
inserted
Result
The unit receives and displays the correct bit-
rate.
If the Forward to Gateway option is turned on,
the unit will forward the data stream to the
gateway address given.
Result
Edits the parameter for choosing the appropriate
component or PID if the required Teletext data
is not currently present
Enables/Disables Teletext
Chooses if the Teletext is played out straight
away or on the PTS
Result
Edits the parameter for enabling VITC
pass-through.
Selects the line for VITC insertion.
Operating the Equipment Locally
3-19