Menu Structure - Ericsson RX8200 User Manual

4.4.1

Menu Structure

The Front Panel menus and sub-menus, available on the LCD, provide the
configuration parameters that may be viewed, selected and/or modified.
•
•
•
•
EN/LZT 790 0009 R1A 2011-03-30
System - Provides sub-menus for viewing/configuring the receiver hardware
and access parameters.
- Network – Enables the input and display of the addresses required to
communicate with the receiver. Access to the receiver Status page is also
available from this sub-menu.
- Build - Provides version and ID numbers for the hardware and software
products installed in the receiver. Also provides options for rebooting the
receiver and deactivating the Front Panel controls.
- Unit Serial Number - Displays the unit serial number.
- Factor - Provides receiver rebooting options.
- FP (Front Panel) – Enables viewing/configuring of the Front Panel lockout
facility, which allows the Front Panel controls to be deactivated.
Input - Provides sub-menus for viewing/configuring the Input Card (Satellite
Input Card, I/P Input Card or G.703 Input Card) parameters.
- Select/Primary Input - Enables the selection of the primary input for the
receiver.
- Select Satellite Input – Enables viewing and editing of the configuration
parameters for the Satellite Input Card, if fitted.
- IP Input Card - Enables viewing and editing of the configuration parameters
for the I/P Input Card, if fitted.
- Configure G.703 Input - Enables viewing and editing of the configuration
parameters for the G.703 Card, if fitted.
Service – Provides sub-menus for viewing/configuring the currently selected
service for decode from the input feed.
- Decode Service - Enables selection of the required decode service.
- Video – Enables selection of video services, such as the video component,
etc.
- Audio - Enables selection of audio services, such as the channel, etc.
CA Systems – Provides sub-menus for viewing/configuring Conditional Access
parameters that restrict and control access to the receiver and select the service
for decryption from the incoming feed.
- Service Table – Displays a summary of the CA features and the service ID
number.
Front Panel Control
21 (44)