Removing The Board Unit; Removing The Operation Panel Unit; Removing The Scanner Cover Unit - Canon MF3110 - ImageCLASS Laser Multifunction Service Manual

Chapter 3
3.2.4.6 Removing the Board
Unit
1) Remove the 4 screws [1] on the back side of the
scanner unit.
[1]
F-3-130
2) Open the board unit [1], and remove the connector
[2], the grounding cable [3] and the 3 flat cables [4].
[4]
[1]
[3]
F-3-131
3.2.4.7
Removing
Operation Panel Unit
1) Reomve the 2 screws [1], and remove the flat cable
from the core.
[1]
F-3-132
3-32
0007-7507
[2]
the
0007-7509
2) Remove the 2 claws [2] on the operation panel unit
[1], and remove the operation panel unit.
[2]
[1]
F-3-133
3.2.4.8 Removing the Scanner
Cover Unit
1) Remove the platen glass cover.
2) Remove the 3 screws [1].
3) Remove the 4 front claws [2] and the 6 claws [3] on
the right and left sides, and remove the scanner
cover unit.
[4]
[3]
[2]
F-3-134
0007-7511
[1]
[3]