Canon ImageCLASS MF3240 Series Starter Manual
Canon ImageCLASS MF3240 Series Starter Manual

Canon ImageCLASS MF3240 Series Starter Manual

Canon printer starter guide
Hide thumbs Also See for ImageCLASS MF3240 Series:

Advertisement

Series
Starter Guide
Please read this guide before operating this equipment.
After you finish reading this guide, store it in a safe place for future reference.
ENG

Advertisement

Table of Contents
loading

Summary of Contents for Canon ImageCLASS MF3240 Series

  • Page 1 Series Starter Guide Please read this guide before operating this equipment. After you finish reading this guide, store it in a safe place for future reference.
  • Page 2: Set Up The Machine

    Set Up the Machine Unless otherwise mentioned, illustrations used in this manual are those taken from the imageCLASS MF3240, and also the menus described in this manual are based on the model MF3240. Unpacking the Machine ● Remove all shipping tapes on the machine.
  • Page 3: Do You Have Everything

    Do You Have Everything? ●Cassette Extension ●Machine ●Power Cord ●Telephone Cable Manuals for the Machine ● Starter Guide (This Document): Machine set-up and software installation ● Basic Guide: Basic features, maintenance, machine settings, and specifications ● Advanced Guide (in User Software CD): Advanced features, system monitor, and reports and lists ●...
  • Page 4: Install Toner Cartridge

    Install Toner Cartridge Gently rock the toner cartridge five or six times to Remove the toner cartridge from the bag. distribute toner inside. Keep the bag for future use. Hold the toner cartridge and align the protrusions Close the front cover. (A) on both sides of the toner cartridge to the CAUTION guides (B) in the machine, then gently slide the...
  • Page 5: Set Up The Paper Cassette And Load Paper

    Set Up the Paper Cassette and Load Paper Insert the output tray into the front slot on the Pull out the paper cassette completely. machine. CAUTION Pull the paper cassette straight/forward. Pulling it at an angle may damage the paper sensing lever inside the machine.
  • Page 6 Pinch and slide the lock release lever so that the NOTE side paper guides match the side of paper. Make sure the paper stack does not exceed the load limit mark (A) and it is loaded under the hooks (B) on the side paper guides.
  • Page 7: Connect Telephone Cables

    Connect Telephone Cables Connect the supplied telephone cable to the line jack (A) and the wall jack. Connect your external telephone to the external device jack (B) if required.
  • Page 8: Connect The Power Cord

    Connect the Power Cord Connect the power cord into the rear socket and the wall The machine enters standby mode. outlet. NOTE There is no power switch. What if... ● <CLOSE COVER/FRONT COVER> is displayed: Make sure that the front cover is closed properly. (See “Install Toner Cartridge,”...
  • Page 9: Set The Machine For Sending Faxes

    Set the Machine for Sending Faxes Guidelines for Enterirng Information The sender information you register in the machine appears in the header of each page received by your recipient. Fax/telephone number Date and time Unit name NOTE Before sending a fax, you MUST register your fax number, user name, and the current date and time in the machine. Entering Information Use the following keys to enter information in the machine.
  • Page 10: Set The Telephone Line Type

    Register Sender Information Press [Additional Use [ ] or [ ] to Functions]. select <4 FAX SETTINGS>, then press [OK]. Use [ ] or [ ] to Use the numeric keys to select <2 UNIT NAME>, enter the unit name (up to then press [OK].
  • Page 11: Set The Machine For Receiving Faxes

    Set the Machine for Receiving Faxes Select the Receive Mode that Suits Your Needs Follow the chart below to determine the correct receive mode for your needs. Do you intend to use the machine to receive voice calls? Do you intend to use an answering machine with the machine? Do you intend to receive faxes automatically?
  • Page 12: Installing Software

    Installing Software Installation Procedure Before Installation: • Do not connect the USB cable before installing the software. If you connect the USB cable before installing the software and the Found New Hardware Wizard screen appears, click [Cancel]. • For Windows 2000/XP, log on as an Administrator to install the software.
  • Page 13 Procedure,” then follow the instructions that appear on the screen. ● Canon Cover Sheet Editor The Canon Cover Sheet Editor enables you to create original fax cover sheet templates for use with Canon fax driver. For details, see the online help for this program.
  • Page 14: Contacting Service Center

    Copyright Copyright © 2006 by Canon Inc. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written permission of Canon Inc.
  • Page 15 CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON U.S.A., INC. One Canon Plaza, Lake Success, NY 11042, U.S.A. CANON CANADA INC. 6390 Dixie Road Mississauga, Ontario L5T 1P7, Canada CANON EUROPA N.V. Bovenkerkerweg 59-61 1185 XB Amstelveen, The Netherlands CANON FRANCE S.A.S.

Table of Contents