Removing The Power Supply Shield Plate; Removing The Power Supply Assembly; Removing The Gear Unit - Canon MF3110 - ImageCLASS Laser Multifunction Service Manual

Chapter 3
3.5.4.11 Removing the Power
Supply Shield Plate
1) Remove the 5 screws [1] to remove the power
supply shield plate [2].
[2]
[1]
[1]
F-3-197
3.5.4.12 Removing the Power
Supply Assembly
1) Remove the 3 screws [1].
2) Remove the 4 connectors [2] as well as the flat
cable [3] on the ECNT board.
[1]
[2]
[2]
F-3-198
3) As you remove the bosses on both sides [1], lower
the front part of the power supply assembly [2].
Then pull it to remove the power supply assembly.
3-50
0007-7851
0007-7852
[3]
[1]
[2]
[1]
F-3-199
3.5.4.13 Removing the Gear
Unit
1) Remove the 2 screws [1], and detach the drive plate
(small) [2].
[1]
F-3-200
2) Remove the 2 gears [1].
3) While freeing the claw, detach the gear unit [2].
[2]
[1]
F-3-201
0007-7853
[2]