Removing The Scanner Unit; Removing The Top Cover; Removing The Right Frame - Canon MF3110 - ImageCLASS Laser Multifunction Service Manual

Chapter 3
3.5.2.6 Removing the Scanner
Unit
1) Remove the connector [1] and the flat cable [2] on
the ECNT board, and remove the screw [3].
(Remove the flat cable from the core.)
2) Remove the 2 screws [4] and the 2 pins [5] on the
right and left sides.
[4]
[1] [3]
F-3-172
3) Remove the 2 screws on the back [1]. Slide the
scanner unit [2] to the back; then, remove it by
lifting it.
[2]
[1]
F-3-173
3-44
0007-7827
[5]
[2]

3.5.2.7 Removing the Top Cover

1) Remove the 2 screws [1], and remove the Top cover [2].
[1]
[2]
F-3-174
3.5.2.8 Removing the Right
Frame
1) Remove the 3 screws [1], and remove the right
frame [2].
F-3-175
0007-7828
0007-7829
[1]
[2]
[1]