Removing The Left Cover; Removing The Scanner Unit - Canon MF3110 - ImageCLASS Laser Multifunction Service Manual

2) Remove the 2 screws [1] on the back side, and
remove the right cover [2].
[2]
[1]
F-3-8

3.1.3.3 Removing the left cover

1) Open the front cover [1], and remove the 2 screws
[2] on the front side.
[2]
[1]
F-3-9
2) Remove the 2 screws [1] on the back side, and
remove the left cover [2].
F-3-10
3.1.3.4
Removing the rear
cover
1) Opening the face up cover [1], and then lower the
0007-7447
[2]
[1]
0007-7450
fixing pressure release levers [2] on both sides and
release the pressure.
2) Remove 2 screws [3].
3) Remove the rear cover [4] as you pull it toward you.
[2]
[3]
[1]
F-3-11
3.1.3.5 Removing the Scanner
Unit
1) Remove the connector [1] and the flat cable [2] on
the ECNT board, and remove the screw [3].
(Remove the flat cable from the core.)
2) Remove the 2 screws [4] and the 2 pins [5] on the
right and left sides.
[4]
[1] [3]
F-3-12
Chapter 3
[3]
[4]
0007-7460
[5]
[2]
3-3