High Voitage Power Supply Pcb; Removing The Right Cover - Canon MF3110 - ImageCLASS Laser Multifunction Service Manual

3) As you remove the bosses on both sides [1], lower
the front part of the power supply assembly [2].
Then pull it to remove the power supply assembly.
[2]
[1]
F-3-51
3.1.9.7 Removing the Power
Supply Board
1) Remove the connector [1] and the flat cable [2].
2) Remove the 4 screws [3]. As you disengage the 3
spacers [4], remove the power supply board [5].
[2]
[4]
[4]
[5]
[3]
F-3-52
3.1.10 High voitage Power Supply
PCB
3.1.10.1 Removing the Cassette
1) Remove the cassette by holding the cassette handle.
0007-7698
[4]
[1]
[3]
0002-7494
3.1.10.2 Removing the right
cover
1) Open the front cover [1], and remove the 2 screws
[2] on the front side.
[1]
F-3-53
2) Remove the 2 screws [1] on the back side, and
remove the right cover [2].
[2]
[1]
F-3-54
Chapter 3
0007-7702
[2]
3-13