External And Controls; Power Supply; Energy Saving Function - Canon MF3110 - ImageCLASS Laser Multifunction Service Manual

Chapter 2 Running H/F 5

2.6 External and Controls

2.6.1 Power Supply

2.6.1.1 Energy Saving Function

2.6.1.1.1 Overview
This machine has the Energy Saver mode. When Energy Saver in the User Menu is set to ON, and no operation is
made for approx. 5 minutes or more in the stand by mode, the machine enters the Energy Saver mode. When the
Energy Saver key on the control panel is pressed, it also enters the Energy Saver mode.
In the Energy Saver mode, the machine turns off all the LED except Energy Saver key and LCD indications, and the
system function will enter the Sleep mode. But the printer section will not enter the Sleep mode.
Recovery from the Energy Saver Mode
In the Energy Saver mode, the machine always monitors the following activities which are the triggers to
resume the operations. When the machine detects any of them, it returns to the stand by mode.
The Energy Saver key on the operation panel is pressed
A print job is accepted
Paper is set at the Multi purpose feeder
The front cover is opend
Memo
In any of the following states, the machine will not enter the Energy Saver mode.
During the print, scanning operation
Out of paper, jam, out of toner, open the front cover, or a service error
Energy Saver in the User Menu is turned off
Energy Saver Setting
To make the Energy Saver mode function, it is necessary to set ENERGY SAVER of TIMER SETTINGS in the User
Menu to ON. In this setting, you can set the period of time from the end of the machine operation to entering the
Energy Saver mode (3 30 min).
2-12
0007-6468