2. Remove the lower left cover.
<For 550-sheet cassette model>
• 2 screws
2x
<For 250-sheet cassette model>
• 3 screws
• 1 claw
3x
Claw
Removing the Left Cover
■ Preparation
1. Draw out the cassette.
2. Remove the lower left
Left Cover" on page 131
3. Remove the inside base
Base Cover" on page 133
1x
cover."Removing the Lower
cover."Removing the Inside
■ Procedure
1. Remove the left cover. ( except the Europe model )
• 1 screw
NOTE:
In the case of the Europe model, refer to step 2.).
1x
Rod
CAUTION:
The left cover has a rod interlocked with the switch on
the power supply PCB.
Remove the left cover without applying load on it.
132
4. Disassembly/Assembly