Temporarily Freezing The Screen; Temporarily Blanking The Screen - Hitachi CP-X4020 Operating Manual

Temporarily freezing the screen

Press the FREEZE button on the remote control.
1.
The "FREEZE" indication will appear on the screen (however,
the indication will not appear when the OFF is selected for
the MESSAGE item in the SCREEN menu (
projector will go into the FREEZE mode, which the picture is
frozen.
To exit the FREEZE mode and restore the screen to normal,
press the FREEZE button again.
The projector automatically exits from the FREEZE mode when some control
buttons are pressed.
If the projector continues projecting a still image for a long time, the LCD
panel might possibly be burned in. Do not leave the projector in the FREEZE
mode for too long.
Images might appear degraded when this function is operated, but it is not a
malfunction.

Temporarily blanking the screen

Press the BLANK button on the remote control.
1.
The BLANK screen will be displayed instead of the screen of
input signal. Please refer to the BLANK item in the SCREEN
37).
menu (
To exit from the BLANK screen and return to the input signal
screen, press the BLANK button again.
The projector automatically exits from the BLANK mode when
some control buttons are pressed.
CAUTION
is on, take one of items below.
• Use the lens cover as it is, which is supplied with the projector
• Use the BLANK function above.
Taking any other action may cause the damage on the projector.
NOTE • The sound is not connected with the BLANK screen function. If
necessary, set the volume or mute fi rst. To display the BLANK screen and mute
the sound at one time, use the AV MUTE function (
If you wish to have a blank screen while the projector's lamp
FREEZE button
39)), and the
BLANK button
44).
Operating
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT AUTO SEARCH BLANK
FREEZE PAGE VOLUME
MAGNIFY
UP
ON
DOWN
OFF
KEYSTONE MY BUTTON MUTE
1 2
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT AUTO SEARCH BLANK
PAGE VOLUME
MAGNIFY FREEZE
UP
ON
DOWN
OFF
KEYSTONE MY BUTTON MUTE
1 2
21