Input Menu; Rogressive; Ideo Nr , C; Omponent - Hitachi CP-X4020 Operating Manual

INPUT menu

INPUT menu
From the INPUT menu, items shown in the table
below can be performed.
Select an item using the
press the cursor (or the ENTER) button to execute
the item. Then perform it according to the following
table.
Item
PROGRESSIVE
VIDEO NR
COLOR SPACE
COMPONENT
(continued on next page)
/ cursor buttons, and
Using the / cursor buttons switches the progress mode.
TV FILM OFF
• This function is performed only for a video signal, s-video signal or
component video signal of 480i@60 or 576i@50.
• When the TV or the FILM is selected, the screen image will be
sharp. The FILM adapts to the 2-3 Pull-Down conversion system.
But these may cause a certain defect (for example, jagged line) of
the picture for a quick moving object. In such a case, please select
the OFF, even though the screen image may lose sharpness.
Using the / cursor buttons switches the noise reduction mode.
HIGH MID
• This function is performed only for a video signal, s-video signal or
component video signal of 480i@60 or 576i@50.
• When this function is excessive, it may cause a certain
degradation of the picture.
Using the / cursor buttons switches the mode for color space.
AUTO RGB
• This item can be selected only for a computer signal or a
component video signal (except SCART RGB).
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well at some signals. In such a
case, it might be good to select a suitable mode except the AUTO.
Using the / cursor buttons switches the function of the
COMPONENT (Y, Cb/Pb, Cr/Pr) port.
COMPONENT
When the SCART RGB is selected, the COMPONENT (Y, Cb/Pb,
Cr/Pr) and the VIDEO ports will function as a SCART RGB port.
A SCART adapter or SCART cable is required for a SCART RGB
input to the projector. For details, contact your dealer.
Description
LOW
SMPTE240 REC709
SCART RGB
INPUT menu
REC601
31