Easy Menu - Hitachi CP-X4020 Operating Manual

EASY MENU

EASY MENU EASY MENU
From the EASY MENU, items shown in the table
below can be performed.
Select an item using the
perform it according to the following table.
Item
ASPECT
AUTO KEYSTONE
(EXECUTE)
KEYSTONE
PICTURE MODE
(continued on next page)
24
/ cursor buttons. Then
Using the / cursor buttons switches the mode for aspect ratio.
See the ASPECT item in the IMAGE menu (
Using the cursor (or the ENTER) button executes the auto
keystone function.
See the AUTO KEYSTONE (EXECUTE) item in the SETUP menu (
Using the / cursor buttons corrects the vertical keystone
distortion.
See the KEYSTONE item in the SETUP menu (
Using the / cursor buttons switches the picture mode.
The picture modes are combinations of the GAMMA and the
COLOR TEMP settings. Choose a suitable mode according to the
projected source.
NORMAL
DAYTIME
NORMAL
CINEMA
DYNAMIC
BOARD(BLACK)
BOARD(GREEN)
WHITEBOARD
DAYTIME
• When the combination of the GAMMA and the COLOR TEMP
differs from pre-assigned modes above, the display on the menu
for the PICTURE MODE is "CUSTOM". Please refer to the GAMMA
and the COLOR TEMP (
• Lines or other noise might appear on the screen when this function
is operated, but it is not a malfunction.
Description
CINEMA DYNAMIC
WHITEBOARD
GAMMA
1 DEFAULT
2 DEFAULT
3 DEFAULT
4 DEFAULT
4 DEFAULT
5 DEFAULT
6 DEFAULT
26, 27) items in the PICTURE menu.
29).
34).
BOARD(BLACK)
BOARD(GREEN)
COLOR TEMP
2 MID
3 LOW
1 HIGH
4 Hi-BRIGHT-1
5 Hi-BRIGHT-2
2 MID
6 Hi-BRIGHT-3
34).