Hitachi CP-X4020 Operating Manual page 36

Item
COLOR TEMP
COLOR
TINT
SHARPNESS
(continued on next page)
Using the / cursor buttons switches the color temperature mode.
1 HIGH
6 CUSTOM
6 Hi-BRIGHT-3
5 CUSTOM 5 Hi-BRIGHT-2
To adjust CUSTOM
Selecting a mode whose name
includes the CUSTOM and then
pressing the cursor (or the ENTER)
button displays a dialog to aid you in
adjusting the OFFSET and GAIN of the
selected mode.
The OFFSET adjustments change the color intensity on the whole
tones of the test pattern.
GAIN adjustments mainly affect color intensity on the brighter tones
of the test pattern.
Choose an item using the
using the / cursor buttons.
You can display a test pattern for checking the effect of your
adjustment by pressing the ENTER (or the INPUT) button.
Each time you press the ENTER (or the INPUT) button, the pattern
changes as below.
No pattern Gray scale of 9 steps
Ramp
• Lines or other noise might appear on the screen
when this function is operated, but it is not a
malfunction.
Using the / cursor buttons adjusts the strength of whole color.
Weak Strong
• This item can be selected only for a video, s-video and component
video signal.
Using the / cursor buttons adjusts the tint.
Reddish Greenish
• This item can be selected only for a video, s-video and component
video signal.
Using the / cursor buttons adjusts the sharpness.
Weak Strong
• There may be some noise and/or the screen may fl icker for a
moment when an adjustment is made. This is not a malfunction.
Description
1 CUSTOM 2 MID
4 CUSTOM
/ cursor buttons, and adjust the level
Gray scale of 15 steps
PICTURE menu
2 CUSTOM
3 LOW
3 CUSTOM
4 Hi-BRIGHT-1
27