Image Menu - Hitachi CP-X4020 Operating Manual

IMAGE menu

IMAGE menu
From the IMAGE menu, items shown in the table
below can be performed.
Select an item using the
press the cursor (or the ENTER) button to execute
the item. Then perform it according to the following
table.
Item
ASPECT
OVER SCAN
V POSITION
H POSITION
(continued on next page)
/ cursor buttons, and
Using the / cursor buttons switches the mode for aspect ratio.
For a computer signal
NORMAL 4:3
For a video signal, s-video signal or component video signal
4:3 16:9 14:9
For no signal
4:3 (fi xed)
• The NORMAL mode keeps the original aspect ratio of the signal.
Using the / cursor buttons adjusts the over-scan ratio.
Small (It magnifi es picture)
• This item can be selected only for a video, s-video and component
video signal.
• When this adjustment is too large, certain degradation may appear
at the frame area of the picture. In such a case, please adjust small.
Using the / cursor buttons adjusts the vertical position.
Down Up
• Over-adjusting the vertical position may cause noise to appear on the
screen. If this occurs, please reset the vertical position to the default
setting. Pressing the RESET button on the remote control when the V
POSITION is selected will reset the V POSITION to the default setting.
• When this function is performed on a video signal, s-video signal,
or component video signal, the range of this adjustment depends on
the OVER SCAN (
the OVER SCAN is set to 10.
Using the / cursor buttons adjusts the horizontal position.
Left Right
• Over-adjusting the horizontal position may cause noise to appear on the
screen. If this occurs, please reset the horizontal position to the default
setting. Pressing the RESET button on the remote control when the H
POSITION is selected will reset the H POSITION to the default setting.
• When this function is performed on a video signal, s-video signal,
or component video signal, the range of this adjustment depends on
the OVER SCAN (
the OVER SCAN is set to 10.
Description
16:9 16:10
Large (It reduces picture)
above) setting. It is not possible to adjust when
above) setting. It is not possible to adjust when
IMAGE menu
29