Temporarily Freezing The Screen - Hitachi CP-CX301WN User Manual

Temporarily freezing the screen

1.
Press the FREEZE button on the remote control.
The "FREEZE" indication will appear on the screen (however,
the indication will not appear when the OFF is selected for
the MESSAGE item in the SCREEN menu (54)), and the
projector will go into the FREEZE mode, which the picture is
frozen.
To exit the FREEZE mode and restore the screen to normal,
press the FREEZE button again.
● The projector automatically exits from the FREEZE mode when some control
buttons are pressed.
● If the projector continues projecting a still image for a long time, the LCD
panel might possibly be burned in. Do not leave the projector in the FREEZE
mode for too long.
● Images might appear degraded when this function is operated, but it is not a
malfunction.
Operating
FREEZE button
INPUT IWB CALIBRATION
ASPECT AUTO ACCENTUALIZER HDCR
D-ZOOM
- +
PAGE VOLUME
MAGNIFY MYBUTTON
UP ON 1 ＋
2 ー
DOWN OFF
KEYSTONE TEMPLATE FREEZE AV MUTE
ESC MENU
ENTER
POSITION RESET
29