Power On/Off; Turning On The Power; Turning Off The Power - Hitachi CP-X4020 Operating Manual

Power on/off

Power on/off Power on/off

Turning on the power

Make sure that the power cord is fi rmly and
1.
correctly connected to the projector and the
outlet.
Make sure that the POWER indicator is
2.
steady orange (
cover.
Press the STANDBY/ON button on the
3.
projector or the remote control.
The projection lamp will light up and the POWER
indicator will begin blinking in green. When the power
is completely on, the indicator will stop blinking and light in steady green
59).
(
To display the picture, select an input signal according to the section "Selecting an
15).
input signal" (

Turning off the power

Press the STANDBY/ON button on the projector or the remote control. The
1.
message "Power off?" will appear on the screen for about 5 seconds.
Press the STANDBY/ON button again while the message appears.
2.
The projector lamp will go off, and the POWER indicator will begin blinking
in orange. Then the POWER indicator will stop blinking and light in steady
orange when the lamp cooling is complete (
Attach the lens cover, after the POWER indicator turns in steady orange.
3.
Do not turn the projector on for about 10 minutes or more after turning it off.
Turning the projector on again too soon could shorten the lifetime of some
consumable parts of the projector.
WARNING
not look into the lens of the projector or look inside of the projector through any
of the projector's openings.
Do not touch around the lamp cover and the exhaust vents during use or just
after use, since it is too hot.
NOTE • Turn the power on/off in right order. Please power on the projector
prior to the connected devices.
• This projector has the function that can make the projector automatically turn on/
off. Please refer to the DIRECT ON (
OPTION menu.
• Use the shutdown switch (
normal procedure.
14
59). Then remove the lens
A strong light is emitted when the projector's power is on. Do
61) only when the projector is not turned off by
STANDBY/ON
59).
42) and the AUTO OFF (
STANDBY/ON button
POWER indicator
INPUT MENU
COMPUTER
VIDEO
ASPECT
MAGNIFY FREEZE
ON
OFF
KEYSTONE
POSITION
ESC
43) items of the
SECURITY
LAMP
TEMP
POWER
MY SOURCE/
DOC.CAMERA
AUTO SEARCH BLANK
PAGE VOLUME
UP
DOWN
MY BUTTON MUTE
1 2
MENU
ENTER
RESET