Hitachi CP-X4020 Operating Manual page 53

OPTION menu
Item
MY BUTTON
MY SOURCE
(continued on next page)
44
This item is to assign one of the following functions to the MY
BUTTON 1/2 on the remote control (
(1) Use the / cursor buttons on the MY BUTTON menu to select
a MY BUTTON - (1/2) and press the
button to display the MY BUTTON setup dialog.
(2) Then using the
following functions to the chosen button. Press the ENTER (or
the INPUT) button to save the setting.
• COMPUTER IN1: Sets port to the COMPUTER IN1.
• COMPUTER IN2: Sets port to the COMPUTER IN2.
• COMPONENT: Sets port to the COMPONENT (Y, Cb/Pb, Cr/Pr).
• S-VIDEO: Sets port to the S-VIDEO.
• VIDEO: Sets port to the VIDEO.
• INFORMATION: Displays the INPUT_INFORMATION (
the SYSTEM_INFORMATION or nothing.
• AUTO KEYSTONE : Performs automatic keystone distortion
34).
correction (
• MY MEMORY: Loads one of adjustment data stored (
When more than one data are saved, the adjustment
changes every time the MY BUTTON is pressed.
When no data is saved in memory, the
dialog "No saved data" appears.
When the current adjustment is not
saved to memory, the dialog as shown in
the right appears.
If you want to keep the current adjustment, please press
the cursor button to exit. Otherwise loading a data will overwrite
the current adjusted condition.
• ACTIVE IRIS: Changes the active iris mode.
• PICTURE MODE: Changes the PICTURE MODE (
• FILTER RESET: Displays the fi lter time reset confi rmation dialogue
43).
(
• TEMPLATE: Makes the template pattern selected to the
TEMPLATE item (
• AV MUTE: Turns the picture and audio on/off.
sing the / cursor buttons selects the picture input port to be
U
selected with pressing the MY SOURCE/DOC.CAMERA button on
the remote control.
Select the picture input that is connected with a document camera.
COMPUTER IN1
VIDEO S-VIDEO
Description
6).
/ / / cursor buttons sets one of the
40) appear or disappear.
COMPUTER IN2
COMPONENT
cursor (or the ENTER)
46) or
28).
24).