Ideo Format - Hitachi CP-X4020 Operating Manual

INPUT menu
Item
VIDEO FORMAT
COMPUTER IN
FRAME LOCK
(continued on next page)
32
The video format for the S-VIDEO port and the VIDEO port can be set.
(1) Use the / cursor buttons
to select the input port.
S-VIDEO VIDEO
(2) Using the /
buttons switches the mode
for video format.
AUTO NTSC
N-PAL
• This item is performed only for a video signal from the VIDEO port
or the S-VIDEO port.
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well for some signals. If the
picture becomes unstable (e.g. an irregular picture, lack of color),
please select the mode according to the input signal.
The computer input signal type for the COMPUTER IN1 and IN2
ports can be set.
(1) Use the / cursor buttons to select the COMPUTER IN port to be set.
COMPUTER IN1
(2) Use the / cursor buttons to select
the computer input signal type.
AUTO SYNC ON G OFF
• Selecting the AUTO mode allows
you to input a sync on G signal or component video from the port.
• In the AUTO mode, the picture may be distorted with certain
input signals. In such a case, remove the signal connector so that
no signal is received and select the SYNC ON G OFF, and then
reconnect the signal.
• The COMPUTER IN1/2 port can support a component signal also
9).
(
Set the frame lock function on/off for each port.
(1) Use the / cursor buttons to select the input ports.
COMPUTER IN1
(2) Use the / cursor buttons to
turn the frame lock function on/off.
ON OFF
• This item can be performed only on a signal with a vertical
frequency of 50 to 60 Hz.
• When the ON is selected, moving pictures are displayed more
smoothly.
• This function may cause a certain degradation of the picture. In
such a case, please select the OFF.
Description
cursor
PAL SECAM
M-PAL NTSC4.43
COMPUTER IN2
COMPUTER IN2