Monitor Out - Hitachi CP-X4020 Operating Manual

Item
MIRROR
STANDBY MODE

MONITOR OUT

Using the / cursor buttons switches the mode for mirror status.
NORMAL H:INVERT
If the Transition Detector is on and the MIRROR status is changed,
the TRANSITION DETECTOR ON alarm (
when projector is restarted after the AC power is turned off.
Using / cursor buttons switches the standby mode setting
between the NORMAL and the SAVING.
NORMAL SAVING
When the SAVING is selected, the power consumption in the
standby state is lowered with some functional restriction as below:
• When the SAVING is selected, the RS-232C communication
control is disabled except to turn the projector on while the projector
is in the standby state.
• When the SAVING is selected, the AUDIO OUT STANDBY setting
of the AUDIO SOURCE (
from the AUDIO OUT ports in the standby state.
The combination of a picture shown on screen and output from the
MONITOR OUT port can be arranged in the menu.
The picture coming into the port selected in the (2) is output to the
MONITOR OUT port while an image from the port chosen in the (1)
is on screen.
(1) Choose a picture input port using
COMPUTER IN1
STANDBY
VIDEO S-VIDEO
• Choose the STANDBY, to select the
output signal from the MONITOR OUT port in the standby state.
(2) Select one of the COMPUTER IN ports using the
buttons.
Choosing the COMPUTER IN1 allows the following choice.
COMPUTER IN1
Choosing the COMPUTER IN2 allows the following choice.
COMPUTER IN2
Choosing other input or the STANDBY allows the following choice.
COMPUTER IN1
• The OFF disables the MONITOR OUT port.
Description
V:INVERT
36) is invalid, and no signal is output
/
COMPUTER IN2
COMPONENT
(Y, Cb/Pb, Cr/Pr)
OFF
OFF
COMPUTER IN2
SETUP menu
H&V:INVERT
50) will be displayed
cursor buttons.
/ cursor
OFF
35