“C” Group: Intelligent Terminal Functions - Hitachi L300P Series Instruction Manual

"C" Group: Intelligent Terminal Functions
The five input terminals [1], [2], [3], [4], and [5] can be configured for any of 33 different
functions (34 functions for –xFE2/–xFU2 models). The next two tables show how to configure
the five terminals. The inputs are logical, in that they are either OFF or ON. We define these
states as OFF=0, and ON=1.
The inverter comes with default options for the five terminals. These default settings are
initially unique, each one having its own setting. Note that European and US versions have
different default settings. You can use any option on any terminal.
Input Terminal
Functions and Options – The function codes in the following table let you assign one of 33
(or 34) options to any of the five logic inputs for the L300P inverters. The functions C001
Configuration
through C005 configure the terminals [1] through [5] respectively. The "value" of these partic-
ular parameters is not a scalar value, but it is a discrete number that selects one option from
many available options.
For example, if you set function C001=01, you have assigned option 01 (Reverse Run) to
terminal [1]. The option codes and the specifics of how each one works are in Chapter 4.
"C" Function
Func.
Name
Code
C001 Terminal [1] function
C002 Terminal [2] function
C003 Terminal [3] function
C004 Terminal [4] function
C005 Terminal [5] function
Run
Mode
Edit
Description
Lo Hi
✘ ✔
✘ ✔
33 programmable
functions
(34 functions for
✘ ✔
–xFE2/–xFU2
models) available for
✘ ✔
terminals (see next
section)
✘ ✔
Defaults
Units
–FE2 –FU2 –FR
(EU) (US) (JP)
18 18 18 —
[RS] [RS] [RS]
16 16 16 —
[AT] [AT] [AT]
03 13 03 —
[CF2] [USP] [CF2]
02 02 02 —
[CF1] [CF1] [CF1]
01 01 01 —
[RV] [RV] [RV]
3–43
L300P Inverter
SRW Display
>C001 IN-TM
1 RS
>C002 IN-TM
2 AT
>C003 IN-TM
3 JG
>C004 IN-TM
4 FRS
>C005 IN-TM
5 2CH