Hitachi L300P Series Instruction Manual page 194

4–60
Configuring the Inverter for Multiple Motors
Parameters for the second motor have function codes of the form x2xx. They appear immedi-
ately after the first motor's parameter in the menu listing order. The following table lists the
parameters that have the second parameter registers for programming.
Function Name
Multi-speed frequency setting
Acceleration time setting (Acceleration 1)
Deceleration time setting (Deceleration 1)
Second acceleration time setting (Acceleration 2)
Second deceleration time setting (Deceleration 2)
Select method to use 2nd acceleration/deceleration
Acc1 to Acc2 frequency transition point
Dec1 to Dec2 frequency transition point
Level of electronic thermal setting
Select electronic thermal characteristic
Torque boost method selection
Manual torque boost value
Manual torque boost frequency adjustment
V/F characteristic curve selection
Base frequency setting
Maximum frequency setting
Select motor constant
Motor capacity setting
Motor poles setting
Motor stabilization constant
Parameter Codes
1st motor 2nd motor
A020 A220
F002 F202
F003 F203
A092 A292
A093 A293
A094 A294
A095 A295
A096 A296
B012 B212
B013 B213
A041 A241
A042 A242
A043 A243
A044 A244
A003 A203
A004 A204
H002 H202
H003 H203
H004 H204
H006 H206