Hardware Requirements - Maxtor Atlas 10K V Product Manual

Product EMI/EMC Qualifications:
Maxtor Corporation's disk drive products meet all domestic and international electro-
magnetic emissions and immunity requirements. Maxtor's disk drive products
conform to the following EMI/EMC Standards
• CE Mark (Europe) is a Self Declaration as per Directive 89/336,
EN55022: 1998 (Emissions) and EN55024: 1998 (Immunity).
• C-Tick Mark (Australia/New Zealand) is a Self Declaration as per
AS/NZS3548: 1998.
• BSMI Mark (Taiwan) is a Self Declaration as per CNS 13438:1998.
• MIC Mark (Korea) is a Certificate of registration for SCSI disk drives.
• Maxtor's disk drives are designed as a separate subassembly that conforms to
the FCC Rules for Radiated and Conducted emissions, Part 15 Subpart J;
Class B when installed in a given computer system.
• Maxtor drives conform to Canadian EMC Standard ICES-003.
2.4

HARDWARE REQUIREMENTS

The Maxtor Atlas 10K V hard disk drive is compatible with host computers and
controllers that provide a 68-pin Wide, or 80-pin SCA-2 interface. A 50-pin to 68-
pin adapter is required to use the 68-pin Wide drive in a 50-pin cabling configuration.
Termination is required on the Maxtor Atlas 10K V hard disk drives as they do not
support on-board SCSI termination.
Maxtor Atlas 10K V 2-5