Table 5-171 Sense Key Information Field Contents - Maxtor Atlas 10K V Product Manual

Command Sense Key
RECOVERED
FORMAT UNIT
ERROR
ILLEGAL
REQUEST
RECOVERED/
READ(6)(10) MEDIUM
ERROR
RECOVERED/
READ LONG MEDIUM
ERROR
ILLEGAL
REQUEST
REASSIGN HARDWARE
BLOCKS ERROR
ILLEGAL
REQUEST
ILLEGAL
SEEK(6)(10)
REQUEST
RECOVERED/
VERIFY MEDIUM
ERROR
RECOVERED/
WRITE(6)(10) MEDIUM
ERROR
RECOVERED/
WRITE AND
MEDIUM
VERIFY
ERROR
RECOVERED/
WRITE LONG MEDIUM
ERROR
ILLEGAL
REQUEST
5-118 Maxtor Atlas 10K V
Table 5-171
Sense Key Information Field Contents
The address of the first bad sector encountered during the format operation.
This sector, and all other bad sectors found during a format operation, are au-
tomatically reallocated by the drive.
The first illegal defect descriptor encountered in the Defect Descriptor List.
The address of the first bad sector found during the read (possible only when
PER=1, DTE=0, and DCR=0.). For a RECOVERED ERROR, the last Logi-
cal Block Address in the error is returned; for a MEDIUM ERROR the first
Logical Block Address is returned.
READ(6)(10) error recovery qualifiers apply. The information field echoes
this command's Logical Block Address field.
The transfer length residue (requested, minus correct length) if the transfer
length is wrong.
Note: ILI will be set.
The address of the first logical sector is not reassigned (the drive ran out of
spare sectors).
The first illegal defect descriptor encountered in the Defect Descriptor List.
The first invalid sector address detected by the command.
WRITE(6)(10) error recovery qualifiers apply. Contains the Logical Block
Address that may have failed the write or verify (compare) operation. For a
RECOVERED ERROR, the last Logical Block Address in the error is re-
turned; for a MEDIUM ERROR the first Logical Block Address is returned.
The address of the first bad sector found during the write. (Possible only when
PER=1, DTE=0, and DCR=0.) For a RECOVERED ERROR, the last Logical
Block Address in the error is returned; for a MEDIUM ERROR the first Log-
ical Block Address is returned.
WRITE(6)(10) error recovery qualifiers apply. This field contains the Logical
Block Address that may have failed the write or verify (compare) operation.
For a RECOVERED ERROR, the last Logical Block Address in the error is
returned; for a MEDIUM ERROR the first Logical Block Address is returned.
Write (10) error recovery qualifiers apply. The information field echoes the
WRITE LONG command's Logical Block Address.
The transfer length residue (requested minus correct length) if the transfer
length is wrong.
Note: ILI will be set.
Field Contents