Maxtor Atlas 10K V Product Manual page 126

Table 5-95
Field
PS
Tracks/Zone
Alternate
Sectors/Zone
Alternate Tracks/
Zone
Alternate Tracks/
Logical Unit
Sectors/Track
Data Bytes/
Physical Sector
Interleave
Track Skew
Factor
Cylinder Skew
Factor
SSEC
HSEC
RMB
SURF
5-68 Maxtor Atlas 10K V
Format Device Page-Field Descriptions (Page 3)
Parameters Savable. This bit is only used with the MODE SENSE command. This
bit is reserved with the MODE SELECT command. A PS bit value of 1 indicates
that the disk drive is capable of saving the page in a non-volatile vendor specific
location.
The number of physical tracks per cylinder.
The number of spare locations within a notch.
The drive does not have any alternate tracks.
The number of tracks reserved for defect handling.
The number of Physical Block Address sectors per track. The value depends on the
Notch value selected in the Notch and Partitions page.
This value is the current disk sector size.
The drive does not support interleave.
The number of physical sectors between the last logical sector on one track and the
first logical sector on the next track within a cylinder.
The number of physical sectors between the last logical sector on one cylinder and
the first logical sector on the next cylinder.
The drive does not use soft sector formatting.
The drive supports hard sector formatting only.
The drive does not support removable logical media.
A Surface bit value of 0 indicates that the drive allocates progressive addresses to
all logical blocks within a cylinder prior to allocating addresses on the next cylin-
der.
Description