Write Long Command (3Fh); Block-Data Format - Maxtor Atlas 10K V Product Manual

Table of Contents

Advertisement

5.48

WRITE LONG Command (3Fh)

The WRITE LONG and READ LONG commands allow the initiator to issue raw
reads and writes of physical sectors addressed as logical blocks with an assumed sector
length of 512 bytes. These commands are used to verify the correction capability of
the drive's ECC and to create defects of a known kind and location to verify the drive's
recovery and bad sector handling policies. The data format and field descriptions are
shown in Table 5-214 and Table 5-215 respectively.
Table 5-214
Bit
Byte
0
1
2 - 5
6
7 - 8
9
Table 5-215
Field
RelAdr
Logical Block
Address
Byte Transfer
Length
5.49
WRITE SAME COMMAND
The WRITE SAME command requests that the drive write the single sector of data
transferred by the initiator to the medium mulitple times. The data format and field
descriptions are shown in Table 5-11 and 5-12 Table respectively.
WRITE LONG Command Descriptor Block-Data Format
7
6
5
WRITE LONG Command-Field Descriptions
Relative Address. This drive does not support this feature; the field must be 0.
The address of the first logical sector where the Write operation will occur.
Must be 578. This value reflects the number of bytes spanned by the ECC, including
the ECC itself, rounded up to the next word (this is easiest understood in bits: 4096
data bits + 1 force error bit + 15 Logical Block Address bits + 16 cross check bits + 2
pad bits + 480 ECC bits + 6 pad bits that are not written to media but are only needed
for transfer = 4496 bits or 578 bytes). Any other value in this field results in a CHECK
CONDITION status and the appropriate sense data.
The initiator should first issue a READ LONG, then modify the data portion only, and
then issue a WRITE LONG. It is also recommended that the drive be reformatted after
these commands are used.
4
3
Operation Code (3Fh)
Reserved
Logical Block Address
Reserved
Byte Transfer Length (578)
Control
Description
Maxtor Atlas 10K V
2
1
0
RelAdr
5-153

Advertisement

Table of Contents
loading

Table of Contents