Maxtor Atlas 10K V Product Manual page 111

Table 5-73
Bit
7
Byte
0 PS LONG (1)
1
2 MSB
3
4
5
6
n
The Subpage Code field indicates which subpage is being accessed. Subpage Code
values are listed in Table 5-93. If the Subpage Code field is zero, the target will return
a CHECK CONDITION status. The sense key will be set to ILLEGAL REQUEST
and the additional sense code set to ILLEGAL FIELD IN PARAMETER LIST.
The Page Length field specifies the length in bytes of the subpage protocol specific
mode page parameters after the Page Length field.
The Protocol Identifier field of 1h indicates the protocol that this mode page applies
to a SPI SCSI device. See the SCSI Primary Commands-2 standard for other port
control page protocol identifiers.
Port Control Page Long Format
6 5 4
Subpage Code
Page Length (n-3)
Reserved
Reserved
Protocol Specific Mode Parameters
3 2
Page Code (19h)
Page Length (n-3)
Protocol Identifier (1h)
Maxtor Atlas 10K V
1 0
LSB
5-53