Epson LQ-2550 Technical Manual page 193

When setting the paper loading lever, observe the following sequence.
loading gear A.
The platen gear should engage the loading planetary gear and the planetary gear should
follow the platen gear when it rotates.
(2) When pressing the loading trigger plate in the direction of the arrow, the loading planetary
gear should engage loading gear A so that the rotation of the platen gear is transmitted to
the loading gear. If the loading planetary gear does not work well, adjust it using the screw
CPS (P) (M3X 8) securing the loading frame.
Loading Lever
When the paper loading trigger assembly is removed, perform the following adjustment:
Section 4.3.2 Paper Feed Motor Backlash Adjustment (Page 4-4 1)
Figure 4-53. Paper Loading Lever, Loading Gear A,
Loading Gear Assembly Setup
Loading Frame
Figure 4-54. Loading Planetary Gear Operation
ADJUSTMENT REQUIRED
Lever
Loading Gear A
r
4-31
REV.-A
1
Trigger