Error Messages - Gerber enVision Owner's Manual

4. The Version number displays. Your Gerber Field Service representative can
interpret it for you.
Note: There are two other ways to display the version screen.
1. Hold down any key while the copyright message displays during power up.
Press any key to resume the power up sequence.
2. From the MAIN MENU, press the slew up and slew down keys
simultaneously.

Error messages

The enVision plotter is programmed to detect certain mechanical/electrical error
conditions at power-up or during operation. A repetitive long-short, long-short
beeping pattern means that an error has been detected. When an error condition
occurs, the plotter may turn off power to the motors. The control panel displays
"System Error" followed by an error code number. The error code numbers and
their meanings are listed below. Call Gerber Field Service at 800-828-5406 or
860-643-1515, or fax 860-645-2448
Error/Failure
1 ROM
2 RAM
3 Plotter Type Invalid
6 MFP Failure
7 Heartbeat Intr Failure
8 Display Failure
9 Encoder Zeroing Failed
10 X Axis Wiring Failure
11 Y Axis Wiring Failure
12 Z Axis Wiring Failure
13 X Axis Encoder Failure
14 Y Axis Encoder Failure
15 Z Axis Encoder Failure
.
Meaning
Read-Only Memory has been
corrupted.
Random-Access Memory has
been damaged.
Jumpers indicate an illegal
type of plotter.
Communication chip
malfunction.
Electrical control board
failure.
Display not responding.
Encoder chip failure.
Correct X axis wiring.
Correct Y axis wiring.
Correct Z axis wiring.
Check X axis encoder and
power connectors.
Check Y axis encoder and
power connectors.
Check Z axis encoder and
power connectors.
Troubleshooting
Note: This display is shown as
an example only. The display
on your plotter may be
different.
Correction
Contact Field Service.
Contact Field Service.
Retry. Call Field Service if retry fails.
Retry. Call Field Service if retry fails.
Retry. Call Field Service if retry fails.
Retry. Call Field Service if retry fails.
Retry. Call Field Service if retry fails.
Contact Field Service.
Contact Field Service.
Contact Field Service.
Contact Field Service.
Contact Field Service.
Contact Field Service.
57