Chapter 5: Troubleshooting; Responding To Error Messages - Gerber EDGE 2 Owner's Manual

Chapter 5:
Troubleshooting

Responding to error messages

If an error occurs while printing, printing stops and an error message
displays in the message display. A list of possible messages and your
response to each is shown below.
After taking corrective action, press ONLINE to restart printing. If the
error is non-recoverable, you must press RESET. The EDGE 2 returns to
offline and you must resend the job from the computer.
Before pressing ONLINE to restart printing, you can:


look at the job while it is still in the EDGE 2 and before printing is
complete


slew the foil
The following is a list of messages which may appear on the message
display and your response to each message. If your response does not
solve the problem, or if a message appears which is not listed here,
contact your distributor or the Gerber Field Service Department. (Please
see "Getting help" on page 2.)
Message
CLOSE COVER
INITIALIZING
OFFLINE
ONLINE
PRINTING IMAGE
PROCESSING IMAGE
Required Action
Close cover and press ONLINE.
Wait for OFFLINE message.
None.
None.
None.
Wait for printing to start.
23