Maintenance; Cleaning - Duerkopp Adler 558 Operating Instructions Manual

3. Maintenance

3.1 Cleaning

A clean machine protects against malfunctions !
Daily cleaning:
Clean the area under the clamp plates, particularly around the hook bracket 1, of
sewing dust, thread rests and cutting refuse.
–
Take off the clamp plates (see Chapter 2.1) and remove cutting waste.
–
Tilt up the machine head and remove cutting waste from the base.
70
Caution Risk of Injury !
Pull the mains plug.
Maintain the machine only when it is turned off.
ATTENTION !
It is to be avoided that cutting refuse enters into the
housing of the main disc cam at the back. If a vacuum is
available this is recommended.
1