Duerkopp Adler 558 Operating Instructions Manual page 33

Upper gimp threading
The feed of the upper gimp is possible with a gimp guider placed in front of the needle.
The threading of the upper gimp is conducted as shown in the illustrations alongside in
the alphabetical order of the letters:
–
Thread the gimp from the gimp roll holder a through gimp guide b.
–
Lead the gimp through the gimp guide angle c and between the tension discs of
the gimp pre-tensioning d.
–
Thread the gimp through the gimp guide e and the gimp guider f.
The assembly for round and flat gimps is available under the Order no.: 578 5101.
35