6) Remove the screw
7) Unhook the claw, and then remove the
multi-purpose tray PCB.
Screw
Claw
Multi-purpose tray PCB
Figure 3-8-10
F. Switch/Sensor PCB
1) Remove the upper cover unit.
2) Remove the right rear and rear covers.
3) Remove the left rear cover.
4) Remove the connector, the 2 screws,
and then the fan duct.
5) Remove the 4 screws.
Connector
Screws
Fan duct
Screws
Figure 3-8-11
6) Remove the 3 screws and the shield
cover.
Screws
Shield cover
Figure 3-8-12
CHAPTER 3
3 - 45