D. Pick-Up Pcb; E. Multi-Purpose Tray Pcb - Canon LBP-3260 Service Manual

CHAPTER 3

D. Pick-up PCB

1) Remove the pick-up unit following steps
1-7 on Page 3-9.
2) Disconnect the 6 connectors.
3) Remove the screw, disconnect the 2
claws, and take out the pick-up PCB.
Connectors Screw
Claws Pick-up PCB
Figure 3-8-7
3 - 44

E. Multi-purpose Tray PCB

1) Remove the multi-purpose tray pick-up
unit following steps 1-6 on Page 3-12.
2) Remove the multi-purpose tray pick-up
unit fan following steps 2-3 on Page 3-
40.
3) Remove the multi-purpose tray pick-up
clutch following steps 2-3 on Page 3-32.
4) Disconnect the 2 connectors
Connector
Figure 3-8-8
5) Remove the spring and then the lifting
plate position detection arm.
Spring
Lifting plate position detection arm
Figure 3-8-9