G. Pick-Up Unit Paper Sensor; H. Pick-Up Unit Door Sensor - Canon LBP-3260 Service Manual

CHAPTER 3

G. Pick-up Unit Paper Sensor

1) Remove the pick-up unit following steps
1-7 on Page 3-9.
2) Disconnect the connector, and then
remove the 2 claws and the sensor unit.
Connector Claws
Sensor unit
Figure 3-5-5
3) Remove the pick-up unit paper sensor
from the sensor unit.
3 - 28

H. Pick-up Unit Door Sensor

1) Remove the pick-up PCB following steps
1-3 on Page 3-44.
2) Remove the 2 screws.
3) Unhook the 2 claws and remove the
gear cover.
Screws Claws
Gear cover
Figure 3-5-6
4) Disconnect the connector from the gear
cover, and remove the pick-up unit door
sensor.