Canon LBP-3260 Service Manual page 23

9) Install the PCB into the printer and fix it with 2 screws.
10) Turn ON the printer switch.
11) Press the On Line key when the printer becomes READY to take the printer off-line.
12) Press the Menu key to select "CONFIG MENU."
13) Press the Item key to select "FORMAT DISK."
14) Press the Enter key.
"+FORMAT DISK -IGNORE DISK" appears in the display.
15) Press the +Plus/-Minus key.
"+REALLY FORMAT -IGNORE DISK" appears in the display.
16) Press the +Plus/-Minus key.
"FORMATTING..." appears in the display, Disk LED lights up and formatting starts.
17) When the printer completes formatting the hard disk, "DISK FMT RESTART" appears in the
display, and the printer restarts automatically.
Power On
READY
Press On Line key
PAUSED
Press Menu key
CONFIG MENU
Press Item key
Press Enter key +FORMAT DISK
CONFIG MENU
FORMAT DISK
Figure 1-5-5
CHAPTER 1
-IGNORE DISK
Press +Plus/-Minus key
+REALLY FORMAT
-IGNORE DISK
Press +Plus/-Minus key
FORMATTING...
DISK FMT RESTART
1 - 13