B. Video Controller Pcb Unit - Canon LBP-3260 Service Manual

CHAPTER 3

B. Video Controller PCB Unit

1. Removal from the printer
1) Loosen the 2 screws then pull out the
video controller PCB unit.
Screws
Video controller PCB unit
Figure 3-8-2
2. Disassembly/reassembly
a. Video Controller PCB
1) Remove the 2 screws.
Video controller PCB
Figure 3-8-3
3 - 42
Screws
2) Remove the 2 screws (M3) and the
guide.
3) Remove the 1 screw (M4) and the 4
screws (M3), then take out the video
controller PCB.
Screw (M3)
Guide
Screws (M4)
Screws (M3)
Video controller PCB
Figure 3-8-4
Note: If you removed ROM DIMM or RAM
DIMM when you repaced the video
controller PCB, reinstall it on the
new video controller PCB.