Table of Contents
Advertisement
APPENDIX
Message
deck) is missing.
DECK2 MISSING
The specified lower cassette (2x500 sheet
deck) is missing.
OUTPUT FULL
The specified face-down tray is paper full.
STD. TRAY
OUTPUT FULL
The specified output tray of the stapler stack-
CHECK BIN 1
er is paper full.
OUTPUT FULL
The specified output tray of the stapler stack-
CHECK BIN 2
er is paper full.
OUTPUT FULL
The specified output tray of the stapler stack-
CHECK BIN 3
er is paper full.
OUTPUT FULL
The specified output bin (face-up bin of the
SORTER BIN UP
sorter) is paper full.
CHECK SORTER
For use only when the sorting mode of the
BIN
sorter is selected. Any or all of the bins of the
REMOVE ALL
sorter are paper full or not empty.
PAPER
PRINTER OPEN
Top, right or left (side) cover is open.
COVER OPEN
2,000 sheet or 2x500 sheet deck right cover
(paper path) is open.
STACKER
Stapler stacker top or front (stapler door)
COVER OPEN
cover is open.
SORTER
Sorter top or front cover is open.
COVER OPEN
PAPER JAM
A paper size mismatch has occurred. More
WRONG PAPER
than one paper size has been found in the
SIZE
same tray.
CHECK INPUT TRAY
A paper jam occurred near the input tray.
OPEN FRONT
A paper jam occurred near the front cover.
COVER
OPEN LEFT COVER
A paper jam occurred near the left cover.
OPEN RIGHT
A paper jam occurred near the right cover.
COVER
OPEN TOP COVER
A paper jam occurred near the top cover.
1 PAPER JAM
Paper jam has occurred somewhere in the
paper path.
2 PAPER JAM
Paper jam has occurred in the input paper
path.
3 PAPER JAM
Paper jam has occurred in the input paper
path.
4 PAPER JAM
Paper jam has occurred in the fixing unit area.
5 PAPER JAM
Paper jam has occurred in the fixing unit area.
6 PAPER JAM
Paper jam has occurred near the face-down
tray.
7 PAPER JAM
Paper jam has occurred near the face-down
tray.
8 PAPER JAM
Paper jam has occurred in the fixing unit area.
9 PAPER JAM
Paper jam has occurred near the duplexing
A - 16
Meaning
Action
Reinsert the lower cassette.
Remove the paper from the face-
down tray.
Remove the paper from the tray
(Bin1 of the stapler stacker).
Remove the paper from the tray
(Bin2 of the stapler stacker.
Remove the paper from the tray
(Bin3 of the stapler stacker).
Remove the paper from the tray.
Remove the paper from all the
bins (bin# 1 to 7 of the sorter).
Close all cover doors.
Close the right cover door.
Close all cover doors.
Close all cover doors.
Inspect the trays for mismatched
paper and correct. Remove all
jammed paper and insert the cor-
rect paper size in the tray. Close
all covers to go back to READY.
Check the area specified.
Remove the jammed paper from
the paper path. The top cover
must be opened and closed to
resume printing.
Advertisement
Table of Contents
Troubleshooting
