Canon LBP-3260 Service Manual page 119

4) Remove the high-voltage power supply
unit following steps 1-3 on Page 3-47.
5) Undo the connector, remove the 4
screws and then the main motor.
6) Remove the 2 screws and the drive unit.
Screws Drive unit
Figure 3-3-5
C. Pick-up Unit
1) Pull out the upper and lower cassettes.
2) Perform steps 1-6 on Page 3-12 to
remove the multi-purpose tray pick-up
unit.
3) Remove the right cover.
4) Undo the connector and remove the
cable from the cable guide.
Connector Cable
Cable guide
Figure 3-3-6
5) Perform steps 1-2 on Page 3-17 to
remove the pick-up, feed and separation
rollers.
6) Remove the screw (M3x10).
7) Remove the 3 screws (M3x8), and take
out the pick-up unit.
Screw (M3 10) Screw (M3 8)
Pick-up unit
Figure 3-3-7
CHAPTER 3
3 - 9