Re-Pick Up From The Holding Tray - Canon NP6260 Service Manual

F. Re-Pick Up from the Holding Tray
Pick-up/separation takes place when the Copy Start key is pressed for copying on
the second side.
When the Copy Start key is pressed, the holding tray re-pick up solenoid (SL6) turns
on to rotate the holding tray re-pick up roller, thereby feeding the copy paper in the direc-
tion of the feeding roller/separation belt; at the same time, the holding tray weight sole-
noid (SL7) turns on to lower the weight plate on the copy paper so as to assist feeding
of copy paper.
If double feeding occurs, i.e., if two or more sheets are being sent to the feeding
roller/separation belt by the holding tray re-pick up roller, the separation belt serves to
push the top sheet back to the holding tray.
Reference:
The weight plate is lowered only when the first sheet is re-picked up and when the
last sheet is picked up.
COPYRIGHT © 1997 CANON INC.
Separation belt
Feeding roller Holding tray
re-pick up roller
Figure 5-618
CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 5 PICK-UP/FEEDING SYSTEM
Weight plate
Copy paper
5-37