Blanking Exposure Lamp Assembly; Removing The Blanking Exposure Lamp Assembly - Canon NP6260 Service Manual

6) Disconnect the connector
remove the two mounting screws
then, remove the pre-exposure lamp
unit .
D. Blanking Exposure Lamp
Assembly
1. Removing the Blanking Exposure
Lamp Assembly
1) Open the front door, and slide out
the hopper assembly.
2) Disconnect the two connectors
and remove the mounting screw
then, slide out the blanking expo-
sure lamp assembly
Caution:
When removing the blanking expo-
sure lamp assembly, take care so
as not to damage the photosensi-
tive drum.
COPYRIGHT © 1997 CANON INC.
, and
;
,
;
slowly.
CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 IMAGE FORMATION SYSTEM
Figure 4-309
Figure 4-310
4-43